950mm
Likewise, people ask, what is the minimum strength of the top rail of a guardrail system?
Guardrail systems shall be capable of withstanding, without failure, a force of at least 200 pounds (890 N) applied within 2 inches (5.1 cm) of the top edge, in any outward or downward direction, at any point along the top edge.
One may also ask, what are the 3 load ratings of scaffolds? OHSA designates three different categories for load bearing calculations on scaffold boards. They are: Light Duty – 25 pounds per square foot. Medium Duty – 50 pounds per square foot.
Likewise, what is the required minimum height of guardrails?
42 inches
How high can a platform be without handrails?
Guardrails -– also called standard railings -– are the primary means of preventing employees from falling to lower levels in general industry as required under 1910.23(c). Specifically, all platforms 4 feet or more above the adjacent floor or ground must be protected by a standard guardrail on all open sides.
Related Question Answers
How strong is a guardrail?
Guardrail systems are capable of withstanding, without failure, a force of at least 200 pounds (890 N) applied in a downward or outward direction within 2 inches (5 cm) of the top edge, at any point along the top rail. What are the 4 methods of fall protection?
There are four generally accepted categories of fall protection: fall elimination, fall prevention, fall arrest and administrative controls. What are the three main parts of a guardrail?
Guardrails have three main parts: a top rail, a mid rail, and a toe board. What is the difference between handrail and guardrail?
A handrail is a railing used for support. Staircase between walls with an aluminum handrail. Guardrail. In building terms, a guardrail is a railing used to prevent falling from an elevated surface like a deck or balcony. How much force can a guardrail take?
Guardrail systems must be capable of withstanding at least 200 pounds of force applied within 2 inches of the top edge, in any direction and at any point along the edge, and without causing the top edge of the guardrail to deflect downward to a height less than 39 inches above the walking/working level. What is the OSHA standard for handrails?
The height of handrails shall be not more than 37 inches (94 cm) nor less than 30 inches (76 cm) from the upper surface of the handrail to the surface of the tread, in line with the face of the riser at the forward edge of the tread. What size hole requires a cover?
6 feet
What is the minimum height of a Toeboard?
3½ inches
What is the maximum load for a scaffold?
25 pounds per square foot
How high can you go with scaffolding?
Scaffold tower can be erected in all shapes and sizes. The standard dimensions are 5 foot and 7 foot long. Reaching 5 foot high all the way up to 30 feet tall. Can I erect my own scaffolding?
Because working at heights poses significant risks, both to those working on the scaffold and those below, we do not recommend that you attempt to erect a scaffold on your own, unless you are trained and competent in scaffold erection. The safety of lives is too important to make scaffolding a DIY project. What are the 3 types of scaffolds?
There are three basic types of scaffolds: Supported scaffolds, which consist of one or more platforms supported by rigid, load-bearing members, such as poles, legs, frames, outriggers, etc. Suspended scaffolds, which are one or more platforms suspended by ropes or other nonrigid, overhead support. How do you stabilize scaffolding?
Once the scaffolding is assembled and in place, double-check that it's level and resting securely on all four base plates or casters. If it rocks, readjust one of the screws to stabilize the scaffolding. Use the built-in ladders to climb the scaffolding. Don't climb on the cross braces. Do you need fall protection on scaffolding?
OSHA's scaffolding standard has several key provisions: Fall protection or fall arrest systems -- Each employee more than 10 feet above a lower level shall be protected from falls by guardrails or a fall arrest system, except those on single-point and two-point adjustable suspension scaffolds. What type of scaffold is ideal for use around complex structures?
Modular scaffolding is highly effective in situations where the facade of the structure is complex, and does not allow for use with a conventional scaffold. Such a scaffold can be set up on either side of the building, and offers a great level of flexibility. How high can you build a scaffold without a Licence?
Scaffolding work is defined with a four metre threshold for licensing purposes. This means in some cases a high risk work licence may not be required to erect a scaffold—because it is less than four metres—but there may still be need for a SWMS because it is more than two metres. What is the closest you can generally build a scaffold near a power line?
It requires that a scaffold used in proximity to an insulated power line of less than 300 volts be no closer than 3 feet. 
